In a well-ventilated space, cover a flat surface with a drop cloth or tarp.
Step 2
Place ceramic head on the covered surface. If desired use Painter’s tape to section off any part of the surface, you do not want sprayed.
Step 3
Clean or sand surface before spraying. Surface should be clean, dull and dry.
Step 4
Shake Krylon® COLORmaxx™ Gloss Purple for 2 minutes. Hold can 8”-10” away from surface and begin spraying. Surface will be ready to touch in 20 minutes.
Step 5
Next, shake Krylon® Glitter Blast™ Grape Glitz vigorously for 2 minutes after ball begins to rattle, before spraying. Hold can 10”-12” away from the surface before spraying in a side-to-side sweeping motion, with slight overlap.
Step 6
Spray in a sweeping motion with slight overlap. Apply multiple thin coats until surface is coated. Surface will be dry to touch in 20 minutes.
Step 7
After surface has completely dried, remove tape, and repeat steps using Krylon® Glitter Blast™ Golden Glow.
Step 8
Surface will be dry to touch in 20 minutes, and ready to handle after 24 hours.
PLASTIC PROJECTS
Get inspired to spray
Adding pizzazz to plastic décor or furniture is easy. Just look at the creative ways these DIYers sprayed their way to an attractive refresh.