All paint should be used according to the manufacturer’s instructions.
Wipe down chair to remove any dust or particles (if the plastic is new, wipe down with paint thinner for best results).
Using painter’s tape, completely tape off any area that you do not want painted.
Shake Krylon® Fusion All-In-One® for 1 to 2 minutes.
Applying in a well-ventilated area, hold can 8-10 inches from chair surface and spray in a sweeping motion from side to side.
Apply a thin coat spray paint.
Allow paint to dry for 1 minute.
Apply multiple thin coats until surface is completely covered.
Remove tape immediately after applying paint.
Krylon® Fusion All-In-One® dries in 20 minutes or less and can be handled in about one hour.
Fusion must cure a full seven days to become fully chip and scratch resistant.
Adding pizzazz to plastic décor or furniture is easy. Just look at the creative ways these DIYers sprayed their way to an attractive refresh.