Leaves of Grass Wall Art Project | Krylon® Spray Paint

Krylon Supplies You'll Need

Gloss White
Semi-Gloss Black
Gloss Ivy Leaf

Satin Nickel

Gold Chiffon

Clear

All paint should be used according to the manufacturer’s instructions.

WHERE TO BUY

Other Supplies You'll Need

(2) 22" x 28" Canvases with Wrapped Edges
(3) Leaf Images
Painter’s Tape
Newspaper
Scissors
Adhesive
Paper Towels
Latex Gloves

Spray canvases with Krylon® Gloss White COLORmaxx™ paint and let dry Note: Shake can until ball inside begins to rattle, then shake for an additional two minutes. Hold can 8”-10” from surface, spray in sweeping motion, side-to-side with slight overlap. Dries to touch in 20 minutes or less. Dries to handle in 1 hour. Recoat within 2 hours or after 48 hours.

Cut out leaf images and spray them with one to two thin coats of Krylon® Fusion All-In-One Metallic paint, letting paint dry between each coat.

To avoid overspray of Ivy Leaf green into the Nickel areas, at about 2/3 of the way across canvas, cover the remaining masked areas by taping newspaper onto an existing strip (make sure you aren't sneaking out of the masked line at all).

Coat uncovered portion of the canvas with Krylon® COLORmaxx™ Gloss Ivy Leaf paint and let paint dry. Note: Shake can until ball inside begins to rattle, then shake for an additional two minutes. Hold can 8”-10” from surface, spray in sweeping motion, side-to-side with slight overlap. Dries to touch in 20 minutes or less. Dries to handle in 1 hour. Recoat within 2 hours or after 48 hours.

Spray paint uncovered portion of canvas with Krylon® Fusion All-In-One Metallic Satin Nickel Note: Shake can until ball inside begins to rattle, then shake for an additional two minutes. Hold can 8”-10” from surface, spray in sweeping motion, side-to-side with slight overlap. Dries to touch in 20 minutes or less. Dries to handle in 1 hour. Recoat within 2 hours or after 48 hours.

Practice spraying Krylon® Marbelizing Spray on a sample surface then afterwards: Shake until ball inside begins to rattle, then shake for an additional 2 minutes. Hold can 18” from surface. Spray in sweeping bursts, letting spray filaments fall onto project surface.

Then, standing directly above the canvas (about 2 ft. away) spray a light coat of Krylon® Marbelizing Spray quickly across canvases in one direction. Then another direction, running off the canvases (go very easy at first, you can always add more).

PLASTIC PROJECTS

Get inspired to spray

Adding pizzazz to plastic décor or furniture is easy. Just look at the creative ways these DIYers sprayed their way to an attractive refresh.

Search

DIY Forest Wall Art

Krylon Supplies You'll Need

Other Supplies You'll Need

Step 1

Step 2

Step 3

Step 4: Ivy Leaf and Nickel “Stripes”

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 12

Step 13

Step 14

Step 15

PLASTIC PROJECTS

SIGN UP FOR EMAILS

Connect With Us